Technical Information:


Table 1 Properties of MediaScout^® MaxiChrom 100-X columns (two examples with different bed heights outlined)

Column Type	Inner Diameter X Length	Column Cross Section	Column Volume	Flowrate1	Max. Flowrate1
	(mm x mm)	cm2	ml	ml/min / cm/h	ml/min / cm/h
MaxiChrom 100-127	100 x 127	78.5	1000	300 / 229	< 800 / 611
MaxiChrom 100-200	100 x 200	78.5	1500	300 / 229	< 800 / 611
1This depends on the chromatography material 2 The chemical stability refers to the column hardware parts only. The individual packed chromatography media may have different stability. To avoid damage to the chromatography media, please refer to the relevant manufacturer’s data.

	Resin packing: flow packing to defined compression, according to resin specification
	Connectors:standard Mini TriClamp® ½’’
	Performance: depending on chromatographic medium
	Pressure maximum: 1.5 bar
	Temperature range: Operation/Storage: 5°C - 60°C / 5°C - 30°C
	Storage conditions: equilibrated with 20% ethanol (ion exchangers with additional 150 mM sodium chloride)
	Materials: Polyoxymethylene (POM) (column tube, filter adaptor, end piece, end cap), Viton® (o-rings)
	Filter plates (frits): Polypropylene/polyethylene (17 µm pore size, others on inquiry)
	Chemical stability2: Columns are tolerant to aqueous buffers and salt solutions, pH 2-14, 1 M alkaline solutions, 1 M non-oxidizing mineral acids, 8 M urea, 6 M guanidine hydrochloride, ethanol, isopropanol and detergents1. They are not compatible with strong oxidants and most organic solvents